- Split Search into three campaign types with different jobs: brand (protect your own name cheaply), non-brand (find new customers on category and problem searches) and competitor (a small, capped test). Never let them share a budget or a target.
- Set each target from break-even ROAS, then adjust for how much of that campaign's revenue is truly new. Brand needs a much higher bar than non-brand, because many brand searchers would buy anyway.
- Keep brand traffic out of non-brand and Performance Max with negative keywords and brand exclusions, and judge results on new customers and store margin, not on blended reported ROAS.
Where do Search campaigns fit next to Shopping and Performance Max?
For most stores, the product feed does the heavy lifting on Google. Shopping ads and Performance Max match searches to products from your feed, and they often bring the most revenue. Our guide to Performance Max for eCommerce covers that side.
Search campaigns, with text ads on keywords you choose, still have three jobs a feed can’t do as well:
- Owning your brand results. Controlling the message, sitelinks and landing page when someone searches your name.
- Category and problem searches. Queries such as “non-toxic cookware set” or “how to stop a dog pulling on a leash,” where a collection page or guide sells better than one product image.
- Competitor and comparison searches. People actively weighing options.
Each job has a different value to the business, so each needs its own campaign, budget and target.
How should you structure brand, non-brand and competitor campaigns?
| Campaign | Job | Keywords | Typical bidding | Target logic | Main risk |
|---|---|---|---|---|---|
| Brand | Protect branded clicks at low cost | Your brand name, misspellings, brand plus product | Target impression share or a tight CPC limit | High ROAS bar, low budget | Paying for clicks you’d get free |
| Non-brand | Win new customers on category and problem searches | Category, product type, use case, problem | Maximize conversion value with target ROAS | Near break-even, adjusted for new-customer value | Broad matching into irrelevant searches |
| Competitor | Win shoppers comparing alternatives | Competitor brand names | Manual or capped CPC | Judge on new customers only | Low quality, high cost per click |
Keep this separation clean. If brand terms leak into non-brand, its results look far better than they are, and you’ll move budget toward a campaign that is mostly harvesting your own name.
Do you need to bid on your own brand name?
Brand campaigns usually show a very high return on ad spend. That number is misleading, because many people searching your name would click your organic result if no ad were there. The real question is how much revenue the brand ad adds.
Bidding on your brand usually makes sense when:
- Competitors or resellers bid on your name. Without your ad, the top of the page goes to them.
- Your organic result is weak. Marketplaces, review sites or old pages outrank your store.
- You need message control. A launch, a sale or a shipping deadline you want in the first line people see.
It may add little when nobody else bids and your site ranks first. To test it, pause brand ads in a set of regions for a few weeks and compare total brand-search orders (paid plus organic) with regions where ads stayed on. That is a simple holdout group design, explained in our guide to incrementality testing.
Keep brand out of other campaigns
- In non-brand Search, add your brand name and common misspellings as negative keywords.
- In Performance Max, apply a brand list as a brand exclusion.
- In Search campaigns using AI Max, brand settings now live in the AI Max panel. Google began moving Search brand exclusions into AI Max in May 2025, and brand inclusions and exclusions are set there.
How do you build non-brand campaigns that find new customers?
Non-brand is where Search earns its place, and where most budget is lost.
Group keywords by intent and landing page
Build ad groups around one theme each, matched to the page that answers it best. Category searches go to the collection page, specific product searches to the product page, and problem searches to a guide or a collection with a clear introduction. If the page doesn’t answer the search, the click is wasted, whatever the bid.
Match types, broad match and AI Max
Exact and phrase match keep traffic close to your keywords. Broad match, paired with Smart Bidding, lets Google reach searches you didn’t list. AI Max for Search campaigns goes further: it is a set of features you turn on inside a Search campaign, including search term matching, text customization (ad copy generated from your ads, landing pages and assets) and final URL expansion (sending traffic to the most relevant page on your site). It also has controls: brand inclusions and exclusions, location controls and URL inclusions and exclusions.
These tools need a clear conversion value to learn from, and Google says AI Max won’t be effective if the campaign is limited by budget. Practical rules:
- Review the search terms report weekly at first. Add irrelevant queries as negatives.
- Exclude URLs you never want as landing pages, such as the blog archive, account pages or low-margin clearance collections, if you use final URL expansion.
- Check that tracking templates work with dynamic landing pages before you turn it on.
Tell bidding which customers matter
Google’s customer acquisition goal works in Search campaigns. You can bid higher for new customers than for existing ones, or bid only for new customers. Google needs a list of your existing customers, from first-party data such as a customer list and your website tag. For most stores, the “bid higher” mode is the safer start; the Performance Max guide linked above includes a worked example for setting the extra value.
Should you bid on competitor names?
Google’s ad policies allow competitor campaigns, with limits. Google’s trademark policy says it doesn’t restrict trademarks used as keywords. It can restrict trademarks used in ad text, including in ads from a direct competitor, after a complaint from the owner. In practice, bid on competitor names if you choose to, but don’t put their names in your headlines or descriptions. Trademark law is a separate question from ad policy, so confirm your approach with counsel.
The economics are usually tough. People searching a competitor’s name mostly want that competitor, so click-through rate and Quality Score tend to be low and clicks cost more. A competitor campaign earns its place only when:
- You have a clear reason to switch: price, materials, a guarantee, faster delivery.
- The landing page makes the comparison honestly.
- It runs on a capped budget and is judged only on new customers.
How do you write search ads that sell profitably?
Responsive search ads accept up to 15 headlines and 4 descriptions, and Google combines them. Quality Score, reported from 1 to 10, reflects expected click-through rate, ad relevance and landing page experience, so the ad and the page need to match the search.
What tends to work for stores:
- Specifics over slogans. Price from, materials, sizes, delivery time, return window.
- Shipping and returns in the ad, if they are a strength.
- One headline that repeats the search theme, so the ad clearly matches.
- Sitelinks to your main collections and a shipping or returns page.
- Care with discounts. A percentage in the headline lifts clicks and lowers margin on every order, including those that would have happened at full price.
How should you set targets for each campaign?
Start from break-even ROAS:
Break-even ROAS = 1 ÷ contribution margin
Then adjust by campaign. Non-brand can run near or below break-even if new customers reliably buy again. Brand needs a much higher bar. Competitor campaigns should clear break-even on first orders. Our break-even ROAS guide shows how to calculate contribution margin correctly.
Worked example: three targets for one store
All numbers are illustrative.
A home goods store has a $90 average order and a 40% contribution margin, so break-even ROAS is 1 ÷ 0.40 = 2.5. Its cohort data shows new customers add another $20 of contribution in their first year.
- Non-brand. A new customer is worth $36 + $20 = $56 of contribution in year one. Break-even on that basis is $90 ÷ $56, a ROAS of about 1.6. The store sets a target ROAS of 2.2, leaving room for error and for some non-brand buyers who are not new.
- Brand. A regional holdout suggests roughly half of brand ad revenue would have arrived through organic clicks anyway. To clear break-even on the extra half, the brand campaign needs a reported ROAS of at least 5.0. The store sets a target of 6.0 and a small fixed budget.
- Competitor. First orders must pay. Target ROAS 2.8, budget capped at a small share of Search spend, reviewed monthly on new-customer orders from the store.
How do you measure Search results honestly?
- Report brand and non-brand separately in Google Ads and in GA4. Blended Search ROAS hides the split that matters.
- Count new customers from your store data, not only from Google’s reporting, and compare with spend by campaign.
- Track the total picture. Marketing efficiency ratio (total revenue ÷ total ad spend) shows whether Search growth adds to the business or shifts credit between channels.
- Watch cost per new customer. Our guide to customer acquisition cost explains how to calculate blended and new-customer CAC.
Checklist: a Search account built around profit
- [ ] Brand, non-brand and competitor run as separate campaigns with separate budgets.
- [ ] Brand terms are negatives in non-brand and excluded from Performance Max and AI Max.
- [ ] Each campaign has a target ROAS based on contribution margin, not gross margin.
- [ ] Non-brand ad groups map to one theme and one landing page each.
- [ ] The search terms report is reviewed weekly, with negatives added.
- [ ] URL exclusions are set if final URL expansion is on.
- [ ] The customer acquisition goal is on, with a refreshed existing-customer list.
- [ ] Competitor names appear only as keywords, not in ad text.
- [ ] A brand holdout test has been run, or is planned.
- [ ] Reporting separates new from returning customers using store data.
FAQ
Should brand and non-brand keywords be in the same campaign?
No. They have different jobs, conversion rates and costs, so they need separate budgets and targets. Mixing them makes non-brand look profitable when brand is doing the work.
Is broad match safe for an eCommerce store?
It can work when it’s paired with value-based Smart Bidding, accurate conversion values and an active negative keyword list. Start it in a campaign with a clear target, review search terms weekly and compare results with your exact and phrase match campaigns before shifting budget.
Is it legal to bid on a competitor’s brand name?
Google’s ad policies allow trademarks as keywords but can restrict them in ad text. Trademark law is a separate question and depends on how you use the name, so confirm your approach with counsel before launching a competitor campaign.