- Advantage+ sales campaigns replaced Advantage+ shopping campaigns. A Sales campaign counts as Advantage+ when three levers are on: Advantage+ campaign budget, Advantage+ audience and Advantage+ placements.
- The old existing customer budget cap is gone. You now protect acquisition spend with audience segments, the customer lifecycle setting, customer exclusions and a weekly look at the audience segment breakdown.
- Judge the campaign on margin, not on Meta-reported ROAS. Set the ROAS goal from your break-even ROAS and check how much of the revenue came from people who would have bought anyway.
What is an Advantage+ sales campaign, and what happened to Advantage+ shopping?
An Advantage+ sales campaign is a Meta campaign with the Sales objective where Meta’s automation runs the three main decisions: how budget is spread, who sees the ads and where the ads appear. In Meta’s own documentation, those are the three levers:
- Advantage+ campaign budget: the budget sits at the campaign level and Meta moves it between ad sets.
- Advantage+ audience: Meta finds buyers on its own, using your inputs as suggestions rather than hard limits.
- Advantage+ placements: ads can run across Meta’s apps and the Audience Network without manual placement selection.
When all three are on, the campaign shows as Advantage+. Switch one off and it becomes a regular Sales campaign with more manual control. There is no separate campaign type to pick anymore.
This setup replaced Advantage+ shopping campaigns (often called ASC). It is more than a rename. Ad sets are back, you can add audience suggestions and custom audience exclusions, and the existing customer budget cap that ASC offered was removed. Meta’s Marketing API documentation also retires the legacy ASC API in stages, ending with legacy campaigns blocked from edits. If you still run an old ASC campaign, plan to rebuild it as a Sales campaign rather than keep patching it.
| Advantage+ shopping (legacy) | Advantage+ sales (current) | |
|---|---|---|
| Structure | One campaign, ad set folded in | Campaign with one or more ad sets |
| Audience inputs | Country plus limited controls | Location and minimum age as controls, other inputs as suggestions, custom audience exclusions |
| Existing customer control | Existing customer budget cap (percentage) | Audience segments, customer lifecycle setting, exclusions, ad set structure |
| Ads | Up to 150 per campaign | Up to 50 per ad set, more ad sets for more ads |
| Status | Being retired | Default way to run automated Sales campaigns |
Ads Manager labels change often, so confirm the names here in your own account.
What do you need in place before you launch?
Automation is only as good as the signal it learns from. Three things come first.
Clean purchase signal
Meta optimizes toward the purchases it can see and the values attached to them. Run the Meta Pixel with the Conversions API, send the purchase value and currency, and deduplicate browser and server events with a shared event ID. Then check event match quality for the Purchase event in Events Manager. Our walkthrough of the Meta Conversions API on Shopify covers the setup.
Audience segments
In your ad account’s Advertising settings, Meta lets you define two audience segments from custom audiences:
- Existing customers: people who have bought. Build it from a customer list and a website Purchase custom audience. Email subscribers who never ordered do not belong here.
- Engaged audience: people who interacted with your business but have not bought, such as site visitors and add-to-carts.
Everyone else is the new audience. These segments apply across the account’s Sales campaigns and power both the audience segment breakdown and the “acquire new customers” option covered below. Skip this step and Meta cannot separate new buyers from repeat ones.
Refresh the customer list on a schedule. A list uploaded once and never updated slowly turns your newest customers into “new audience.”
Your numbers
Before you set a single goal, know your contribution margin and your break-even ROAS: Break-even ROAS = 1 ÷ contribution margin. A store with a 40% contribution margin breaks even at a ROAS of 2.5. Anything Meta reports below that, on new-customer revenue, loses money on the first order.
How do you set up an Advantage+ sales campaign step by step?
- Choose the Sales objective and the Website conversion location. Check that the Advantage+ indicator shows all three levers on.
- Pick the performance goal. Maximize the value of conversions if you send reliable order values and your products vary in price. Maximize the number of conversions if values are flat or unreliable.
- Choose a bid strategy. Start with highest volume or value while the campaign gathers data. Add a ROAS goal or a cost per result goal once you know where the campaign settles. Set a ROAS goal from break-even ROAS, not from a number that looks good in a deck.
- Choose the attribution setting. Meta offers standard attribution and, for some goals, an incremental attribution setting that models whether the ad caused the conversion. Whichever you pick, keep it fixed so results stay comparable over time.
- Set the audience controls. Location and minimum age are hard limits. Detailed targeting, lookalikes and remarketing lists act as suggestions. Add custom audience exclusions where you need them (see the guardrails below).
- Leave placements on Advantage+. Use account-level placement controls and brand safety settings if certain apps or publishers are off limits, rather than switching the lever off.
- Load the creative. Mix formats: short video, static images, carousels and catalog ads if you have a clean product feed. Give the system distinct concepts, not ten resizes of one idea. Our Meta creative testing guide covers how to structure the batch.
- Set the budget high enough to buy a steady number of purchases each week, so the campaign can exit the learning phase.
Point each ad at the page that matches its promise. A product ad that lands on a homepage wastes the click; our guide to paid social landing pages covers message match.
What guardrails keep Advantage+ from spending on customers you already have?
Automated campaigns drift toward the cheapest conversions, which often come from people who already know you: past buyers, subscribers, recent cart abandoners. That inflates reported ROAS while doing little for growth. With the budget cap gone, you need other guardrails.
| Guardrail | What it controls | Trade-off |
|---|---|---|
| Customer lifecycle setting: acquire new customers | Ad set delivery focuses on people outside your Existing customers segment | Cost per purchase usually rises; only as accurate as your segment |
| Custom audience exclusion of buyers | Removes a customer list or purchaser audience from the ad set | Meta treats it as a tight constraint, but some excluded people may still be reached |
| Separate ad sets with spending limits | A smaller ad set for engaged audiences and past buyers, a larger one for prospecting | More structure to manage, less freedom for the algorithm |
| ROAS goal at or above break-even | Stops delivery chasing low-value orders | Lower volume, slower spend |
| Weekly audience segment breakdown | Shows spend and results by new, engaged and existing audiences | Reporting only, it does not change delivery |
Pick based on your lifecycle program. If email and SMS already drive most repeat orders, exclude existing customers from prospecting and let owned channels do that job at a fraction of the cost. If you sell consumables with a short replenishment cycle, a small, capped budget for past buyers can be worth it, but measure it separately.
Other guardrails worth setting:
- Creative refresh. Watch frequency and cost per purchase by ad for creative fatigue, and add new concepts on a schedule, not only when results drop.
- Catalog hygiene. Exclude sold-out and low-margin products from catalog ads with product sets.
- Budget changes in steps. Large jumps can push a campaign back into learning. Raise budgets gradually and change one thing at a time.
How do you judge whether the campaign is working?
Meta-reported return on ad spend is the starting point, not the verdict. Read it with three other views:
- New-customer share of spend and revenue, from the audience segment breakdown.
- Blended results: total revenue and new customers against total ad spend across channels, so you see whether Meta growth shows up in the business.
- Incrementality: a conversion lift study or a geographic holdout group tells you how many purchases the ads caused. Both are forms of incrementality testing.
Worked example (illustrative numbers)
All numbers below are illustrative.
A store has a 40% contribution margin, so break-even ROAS is 2.5. Its Advantage+ sales campaign spends $20,000 in a month and Meta reports $80,000 in purchase value, a ROAS of 4.0.
The audience segment breakdown shows:
- Existing customers: $8,000 of spend, $48,000 of reported revenue (ROAS 6.0).
- New and engaged audiences: $12,000 of spend, $32,000 of reported revenue (ROAS about 2.7).
The store’s own data shows most past buyers reorder through email anyway. Suppose only a third of the existing-customer revenue, $16,000, was truly caused by the ads. Incremental revenue is then $16,000 + $32,000 = $48,000 on $20,000 of spend, a ROAS of 2.4. That is below break-even. The campaign that looked strong at 4.0 is slightly losing money on the first order.
The fix is not to cut Meta. Move the $8,000 toward new buyers with the acquire new customers setting or an exclusion, and let lifecycle email and SMS handle repeat orders. For profit-based goals beyond ROAS, see POAS vs ROAS.
Advantage+ sales campaign launch checklist
- [ ] Pixel and Conversions API both send Purchase with value, currency and a shared event ID.
- [ ] Event match quality for Purchase is checked in Events Manager.
- [ ] Existing customers and Engaged audience segments are defined from purchase data and site activity.
- [ ] The customer list refreshes on a schedule.
- [ ] Break-even ROAS is calculated from contribution margin.
- [ ] The Advantage+ indicator shows budget, audience and placements on.
- [ ] Performance goal, bid strategy and attribution setting are chosen and documented.
- [ ] Location and minimum age controls are set; exclusions are added on purpose.
- [ ] Brand safety and account-level placement controls are reviewed.
- [ ] At least three distinct creative concepts are live, each with a matching landing page.
- [ ] Sold-out and low-margin products are excluded from catalog ads.
- [ ] The audience segment breakdown is reviewed weekly.
- [ ] An incrementality test is planned within the first quarter.
FAQ
Can I still set an existing customer budget cap?
Not in Advantage+ sales campaigns. The cap was removed when Advantage+ sales replaced Advantage+ shopping. You can get a similar result with the acquire new customers setting, a customer exclusion, or separate ad sets with spending limits, and you can check the outcome in the audience segment breakdown.
Should I turn off Advantage+ audience to control targeting?
Only for a clear reason, such as a legal age limit or a test that needs a strict audience. Turning a lever off makes it a regular Sales campaign. For most stores, a better approach is to keep automation on and steer it with exclusions, segments and a ROAS goal tied to margin.
How many Advantage+ sales campaigns should a store run?
Fewer than you think. Each campaign needs enough weekly purchases to learn. Many stores do well with one main prospecting campaign plus, if needed, a small separate budget for past buyers.